 |
|
|
|
 |
TwinPlas® Fitting Guide
(Available in 3 metre, 5 metre
and 6 metre lengths)
| Cut
the gutter profile to the required length.
Cut the gutter profile into the fascia brackets
or rest on the stone corbels. Apply Dow Corning
796 silicone to the gutter and slide the sleeve
connectors to the correct position. |
|
| Raise the sleeve
connector in the channel portion of the gutter with
a small wedge or chisel and pump a generous amount
of Dow Corning 796 between the sleeve connector
and the gutter. Fill any gaps with 796 silicone
and fix the connector to the gutter on the top edge
using self tapping screws. |
|
End caps and
outlets must be sealed using Dow Corning 796
silicone. Silicone can be applied to the corbels
or brackets to help secure the gutter. |
|
| Dow Corning
796 silicone is a low modulus, neutral curing silicone
which gives excellent adhesion to PVC-u and must
be used according to the manufacturers instructions.
|
|
|
 |
|
 |
|
